- Nortel Ethernet Routing Switch Owner's Manual

Customizing your system 201
banner command for displaying banner
The banner command for displaying banner specifies the banner displayed
at startup; either static or custom. The syntax for the banner command
to display banner is:
banner [ custom | static | disabled | <1-19> LINE ]
The banner command for displaying banner is executed in the Global
Configuration command mode.
Table 65 "banner command parameters" (page 201) describes the
parameters for the banner command.
Table 65
banner command parameters
Parameters Description
static Displays the default agent-banner.
custom
Displays the custom agent-banner.
disabled Skips the agent-banner display.
<1-19> LINE
Fills the Nth line of the custom banner (1<N<19) with
the text specified in LINE.
show banner command
The show banner command displays the banner. The syntax for the show
banner command is:
show banner [ custom | static ]
The show banner command is executed in the Global Configuration
command mode.
Table 66 "show banner command parameters and variables" (page
201) describes the parameters for the banner command.
Table 66
show banner command parameters and variables
Parameters Description
static Displays default banner
custom
Displays custom banner
(if empty) Displays static, custom or disabled status if parameter
is not entered.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.