- Nortel Ethernet Routing Switch Owner's Manual

194 System configuration using the CLI
terminal speed {2400|4800|9600|19200|38400}|length
<1-132>|width <1-132>
The terminal command is executed in the User Exec mode.
Table 58 "terminal command parameters and variables" (page
194) describes the parameters and variables for the terminal command.
Table 58
terminal command parameters and variables
Parameters and
variables
Description
speed
{2400|4800|9600|192
00|38400}
Sets the transmit and receive baud rates for the terminal.
You can set the speed at one of the five options shown;
default is 9600.
length Sets the length of the terminal display in characters;
default is 24.
width Sets the width of the terminal displaying characters;
default 79.
show cli command
The show cli command displays the current CLI settings. The syntax for
the show cli command is:
show cli {info | mode | password [type]}
The show cli command is executed in the User Exec command mode.
Table 59 "show cli command parameters and variables" (page
194) describes the parameters and variables for the show cli command.
Table 59
show cli command parameters and variables
Parameters and
variables
Description
info Displays general Console settings.
mode Displays CLI mode.
password Displays CLI user names and passwords.
type
Displays password types.
Figure 64 "show cli command output" (page 195) displays the output from
the show cli command.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.