- Nortel Ethernet Routing Switch Owner's Manual

188 System configuration using the CLI
Table 55
ip domain-name command parameters and variables
Parameters and
variables
Description
<LINE> Enter a DNS domain name.
The default value for this command is an empty string.
no ip domain-name command
The no ip domain-name command clears the system’s DNS domain
name (sets it to an empty string). The syntax for the no ip domain-name
command is:
no ip domain-name
The no ip domain-name command is executed in the Global
Configuration command mode.
The no ip domain-name command has no parameters or variables.
default ip domain-name command
The default ip domain-name command clears the system’s DNS
domain name (set it to an empty string). The syntax for the default ip
domain-name command is:
default ip domain-name
The default ip domain-name command is executed in the Global
Configuration command mode.
The default ip domain-name command has no parameters or
variables.
Configuration Management
This section covers the following topics:
•
"Automatically loading Configuration file" (page 188)
•
"ASCII Configuration Generator" (page 191)
Automatically loading Configuration file
This section discusses how to download a configuration file when the
system boots. You use standard CLI commands to modify the configuration
file you want to download. This section contains information about the
following commands:
•
"configure network command" (page 189)
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.