- Nortel Ethernet Routing Switch Owner's Manual

182 System configuration using the CLI
Figure 56
show ip command output
show ip address command
The show ip address command displays the IP configurations, switch
address, subnet mask, and gateway address. The syntax for the show
ip address command is:
show ip address
The show ip address command is executed in the User Exec command
mode.
Table 50 "show ip address command parameters and variables" (page
182) describes the parameters and variables for the show ip address
command.
Table 50
show ip address command parameters and variables
Parameters and
variables
Description
address Displays the current IP address.
Figure 57 "show ip address command output" (page 182) displays a sample
output of the show ip address command.
Figure 57
show ip address command output
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.