- Nortel Ethernet Routing Switch Owner's Manual

Device Manager window 129

Figure 34

Objects in the device view

Selecting a single object

To select a single object:

→

Click the edge of the object.

The object is outlined in yellow, indicating that it is selected. Subsequent

activities in Device Manager refer to the selected object.

Selecting multiple objects

For instructions on selecting multiple objects (such as ports or switches),

see the following table:

Table 22

Selecting multiple objects

Object to be selected

Action

To select a block of contiguous ports Drag to select the group of ports

To select all ports

Choose Edit > Select > Ports

Viewing information about a GBIC port

To view information about a GBIC port, use the following procedure:

Step Action

Select the GBIC.

Choose Edit > Port.

—End—

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007