- Nortel Ethernet Routing Switch Owner's Manual

Opening a device 123
Area Field Description
Device Manager default properties. You cannot
modify this field when configuring the per device
properties.
Telnet Default Telnet is the one that comes with the
operating system. To define a specific Telnet, select
User-Defined and specify the Telnet path and
parameters.
Application Launch
from JDM
SSH Default SSH is the one bundled with in the JDM.
To define a specific SSH, select User-Defined and
specify the SSH client path and parameters.
•
"Opening a device" (page 123)
Opening a device
Opening a device displays the device view, a picture of the device. To
open the device view, you must enter community strings that determine the
access level granted to the device.
Table 18 "SNMP community string default values" (page 123) describes the
default access community strings for the Device Manager software.
Table 18
SNMP community string default values
Access level Description
Read-only public
Read/write private
To display the device view, use the following procedure:
Step Action
1
Do one of the following:
•
Choose Device > Open.
•
Choose Device > Open Last by SNMPv1/v2, and select an
IP address from the list.
•
For previously-opened SNMPv3-enabled devices, choose
Device > Open Last by SNMPv3, and select an IP address
from the list.
•
Click the folder icon in the Device Manager window.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.