- Nortel Ethernet Routing Switch Owner's Manual

122 Getting Started with Device Manager
Area Field Description
Trace The trace field is used to enable and disable SNMP
tracing. When Trace is selected, SNMP protocol
data units (PDUs) are displayed in the Device > Log
dialog box.
Listen for Traps When selected (enabled), Device Manager listens
for traps from the device.
Max Traps in Log The specified number of traps that may exist in the
trap log. The default is 500.
Trap Port Specifies the UDP port that Device Manager listens
to receive SNMP traps.
Listen for Syslogs When selected (enabled), Device Manager listens to
the syslog.
Confirm row deletion A dialog box displays when checked, before deleting
a row.
Default Read
Community
Specifies the default read community.
Default Write
Community
Specifies the default write community.
Status Interval Interval at which status information is gathered
(default is 20 seconds).
Hotswap Detect
every:
The interval at which Device Manager detects the
module information. The default is 1 interval.
Polling
Enable Enables (true) or disables (false) periodic polling of
the device for updated status. If polling is disabled,
the chassis status is updated only when you click
Refresh on the Chassis tab.
Web Management
Http Port Default port is 80. This field specifies the HTTP port
for the application. To access the Device Home Page
using the Web, ensure that the HTTP Port attribute
matches the switch configuration. If you change the
port number, the system prompts you with a warning
message.
Application launch
with ring tone
Enabled by default, you can modify this field only
when configuring the Device Manager default
properties. You cannot modify this field when
configuring the per device properties.
Application Control
Save SNMPv3
Devices to Open
Last
Disabled by default, if you enable this field you are
prompted with a security warning message because
any user can access the device without entering the
SNMPv3 security criteria if this feature is enabled.
You can modify this field only when configuring the
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.