- Nortel Ethernet Routing Switch Owner's Manual

112 Getting Started with Device Manager
See "Executing the JDM installation software on UNIX or Linux"
(page 113).
—End—
Installing JDM on UNIX or Linux from the web
To install the JDM software to a UNIX (Solaris) environment from the web,
use the following procedure:
Step Action
1
Go to the following URL:
w
ww.nortel.com/support
2
Select the software support page for your product.
The software page appears.
3
Click the Java Device Manager version you want.
The Software Detail Information page appears.
4
Download the JDM software for your operating environment to a
desired directory on your system. The software download is a
self-extracting .sh file.
Once the file transfer is complete, continue with the next step.
5
Close all programs.
6
Navigate to the directory on your system where you loaded the
JDM software.
7
Make the installation file executable.
For the Solaris environment, make the file executable by entering:
chmod a+x dm_xxxx_solaris_sparc.sh
For the Linux environment, make the file executable by entering:
chmod a+x jdm_xxxx_linux.sh
8
Run the installation file.
For the Solaris environment, run the dm_xxxx_solaris_sparc.sh file.
For the Linux environment, run the jdm_xxxx_linux.sh file.
See "Executing the JDM installation software on UNIX or Linux"
(page 113).
—End—
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.