User's Manual

AP technical specifications 111

Nortel WLAN Access Point 2332 Series Installation Guide

MAC addresses

Each 2332 Series is assigned a unique block of 64 MAC addresses. Each radio has 32 MAC addresses and can therefore

support up to 32 SSIDs, with one MAC address assigned to each SSID as its BSSID.

An AP’s MAC address block is listed on a label on the back of the AP. If the AP is already deployed and running on the

network, you can display the MAC address assignments by using the show {ap | dap} status command.

All MAC addresses on an AP are assigned based on the AP’s base MAC address, as described in Table 9 on page 111.

Table 8: 802.11b Radio Specifications

Specification Description

Antenna type Integrated omnidirectional with (2) radiating elements to allow for the use of

diversity

Antenna gain Internal: 2.48 dBi peak

Frequency band 2.4 GHz to 2.4835 GHz based on country regulations

Operating channels Based on the country of operation specified by the system administrator

Association rates 11 Mbps, 5.5 Mbps, 2 Mbps, and 1 Mbps, with automatic fallback

Modulation BPSK, QPSK, CCK

Transmit power Based on the country of operation specified by the system administrator

Table 9: 802.11g Radio Specifications