User's Manual

110 AP technical specifications
NN47250-307 (320661-A Version 01.02)
Standards compliance IEEE 802.11
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.3af
Safety and electromagnetic
compliance
FCC Part 15, UL 60950
IC Part 15, CSA 22.2 N0-950, RSS-139-1 and RSS-210
ETS 300-328 (2.4 GHz) and 301-893 (5 GHz), EN 301-489-17
R&TTE Directive 1999/5/EC
TELEC, ARIB T66
GBT-15941-1995, GBT-16841-1997
LP0002
Encryption Wi-Fi Protected Access (WPA)
Advanced Encryption Standard (AES)
40-bit/104-bit Wired-Equivalent Privacy (WEP)
General Power-save mode supported
Transmit power control in 1 dB increments
Supports up to 250 clients per radio
Table 7: 802.11a Radio Specifications
Specification Description
Antenna type Integrated omnidirectional with (2) radiating elements to allow for the use of
diversity
Antenna gain Internal: 5.15 - 5.35 GHz = 2.0 dBi peak, 5.470 - 5.725 GHz = 2.48 dBi
peak and 5.725 - 5.850 GHz = 0.65 dBi peak
Frequency band 5.15 - 5.25 GHz, 5.25 - 5.35 GHz, 5.470 - 5.725 GHz and 5.725 - 5.85 GHz,
based on country regulations
Operating channels Based on the country of operation specified by the system administrator
Association rates 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and
6 Mbps, with automatic fallback
Modulation Orthogonal frequency division multiplexing (OFDM)
Transmit power Based on the country of operation specified by the system administrator
Table 6: AP Mechanical and Compliance Specifications (continued)
Specification Description