User's Manual

52 Installing and connecting an 2332 Series
NN47250-302 (324136-A Version 01.02)
Figure 28. Step 8—Cable Placement
8 Install the Kensington lock (optional).
a Loop the Kensington lock’s cable around an object that cannot be moved or damaged by a person
pulling on the cable.
b Insert the key into the Kensington lock.
c Insert the Kensington lock into the security slot on the AP.
d Rotate the key right or left to secure the lock to the AP.
e Pull on the lock to verify that it is secured to the AP.
f Remove the key.
9 Place the AP on the bracket, making sure to remove any slack that occurs in the cable between the bracket
and the AP.
10 Lock the AP onto the bracket by inserting the 3-mm or 1/8-inch screwdriver into the Lock hole on the
access point as shown in Figure 29.
Warning! To prevent possible damage to the AP, make sure the device is fully
locked onto the bracket before releasing it.
840-9502-0016
Universal mounting bracket
Cable