User's Manual

Installing and connecting an 2332 Series 35
Nortel WLAN Access Point 2332 Series Installation Guide
Mounting an 2332 Series on a solid surface requires using a Cat-5e cable that does not have strain relief. For installation
on all other surfaces, you can use the Cat-5e cable with or without strain relief.
(For more information about cables, see “Cable ports” on page 28.)
Installing an 2332 Series
To install an 2332 Series, use one of the procedures in this section.
Installation hardware and tools
Table 3 lists the mounting hardware and tools required for each type of installation.
Table 2: 10/100 Ethernet Straight-Through Pin Signals
WSS Other Device
Pin Function Pin Function
1RD+1TD+
2RD-2TD-
3TD+3RD+
4PoE+4PoE+
5PoE+5PoE+
6TD-6RD-
7PoE-7PoE-
8PoE-8PoE-