User's Manual

31
Nortel WLAN Access Point 2332 Series Installation Guide
Installing and connecting an 2332
Series
Unpacking an AP
The shipping carton for an AP contains the following items:
•One AP
• Mounting kit:
• One universal mounting bracket (attached to the AP)
• One paper mounting template (used for marking the cutting areas and screw hole locations)
• One two-piece 14.2-mm (9/16-inch) T-bar clamp
• One two-piece 15.9-mm (5/8-inch) T-bar clamp
• One two-piece 23.9-mm (15/16-inch) T-bar clamp
• Two #6 sheet metal screws and two drywall anchors
• Three adhesive rubber feet
• One documentation pack that includes the following documents:
•Nortel WLAN
—Access Point 2332 Series Quick Installation Guide
• Nortel WLAN 2332 Series Access Point Mounting Template
• Nortel WLAN 2300 Series Outdoor Solution Guide
Unpacking an AP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installation requirements and recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installing an 2332 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Connecting an AP to a WSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Verifying AP health . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Note. Before installing an AP, you might need to generate a network plan and an AP
work order with WLAN Management Software . (See “WLAN Management software
network plan and work orders” on page 32.)