User's Manual

AP overview 29
Nortel WLAN Access Point 2332 Series Installation Guide
Figure 3. Health and Radio LEDs—2332 Series
Table 1: Access Point LEDs—2332 Series
LED Appearance Meaning
Health Solid green All the following are true:
• Management link with a WSS is operational.
• AP has booted.
• AP has received a valid configuration from a WSS.
• At least one radio is enabled or is in sentry mode.
Solid amber AP is waiting to receive boot instructions and a
configuration file from a WSS.
Alternating green and
amber
AP is booting and receiving its configuration file from a
WSS.
Radio 1
Radio 2
Solid green A client is associated with the radio.
Blinking green Associated client is sending or receiving traffic.
Blinking amber Non-associated client is sending or receiving traffic.
Alternating green and
amber
Radio is unable to transmit. This state can occur due to any
of the following:
• Excessive radio interference in the environment is
preventing the radio from sending beacons.
• The radio has failed.
Unlit Means one of the following:
• Radio is disabled.
• Radio is enabled, but no clients are associated with the
radio and there is no traffic activity.
Radio 2 LED
Health LED
Radio 1 LED
840-9502-0010