User's Manual
Table Of Contents
- Nortel WLAN-Access Point 2330 Quick Installation Guide
- Copyright © Nortel Networks Limited 2005. All rights reserved.
- Trademarks
- Restricted rights legend
- Statement of conditions
- Canadian IC Statement
- European Community Compliance
- External Antenna Statement
- Contacting Nortel Technical Support
- WLAN-Access Point 2330
- Cable Requirement
- Suspended Ceiling Installation-Flush Ceiling Tiles
- Suspended Ceiling Installation-Drop Ceiling Tiles
- Junction Box Installation
- Solid Wall or Ceiling Installation
- Configuring the AP
6
320662-A
Dynamic Frequency Selection (DFS)
This device implements a DFS feature in accordance with the limits in EN 301 893 Version 1.2.3, Section 4.6 and Annex
D, Tables D.1, D.2 & D.4 for a device operating in the mode defined as “Master”. Section 4.6, Tables 6 and 7 of this
document define the requirements prior to using a channel and during normal operation for a Master device (i.e.,
Interference Detection Threshold, Channel Availability Check Time, Uniform Spreading, Channel Closing Transmission
Time and Channel Move Time). This product qualifies for this category since the maximum achievable transmit power is
greater than 23 dBm per the requirements of Table D.2 in Annex D of the standard.
External Antenna Statement
Intentional radiators, such as the Nortel Networks WLAN Access Point 2330 are not intended to be operated with any
antenna(s) other than those furnished by Nortel Networks. An intentional radiator may only be operated with the
antenna(s) with which it is authorized. For a complete listing of the authorized antennas for use with this product, visit
http://www.nortel.com/support
.
In order to ensure continued compliance, use of an antenna not on the Nortel approved antenna list is not allowed
without specific authorization from Nortel Networks. For additional questions or inquiries regarding specific antennas,
contact Nortel at 1-800-4NORTEL, and use express routing code (ERC) 1572.
Use of an antenna not specifically authorized by Nortel Networks may not comply with local regulatory requirements
with respect to radiated emission limits and may result in illegal operation of the product. The installer of the wireless
system and associated antenna is required to ensure that only those antennas on the Nortel approved antenna list or those
antennas specifically approved by Nortel on a case by case basis are deployed with the intentional radiator.
Be sure to associate the appropriate antenna model number and localized regulatory region when selecting the Nortel
Networks authorized antenna(s).