User's Manual

Suspended Ceiling Installation—Drop Ceiling Tiles 11
Nortel WLAN—Access Point 2330 Quick Installation Guide
Suspended Ceiling Installation—Drop Ceiling Tiles
This procedure applies to T-bars that are 23.9 mm (15/16 inches), 14.2-mm (9/16-inches), or 15.9-mm (5/8-inches) wide.
You also can use this procedure for flush ceilings with 14.2-mm (9/16-inch) or 15.9-mm (5/8-inch) T-bars.
1 Use the mounting template to cut a hole for the Cat 5 cable.
2 Install the T-bar clamp that fits the T-bar.
3 Remove the mounting bracket from the 2330 access point.
T-bar clamps
(use set that fits T-bar)
Mounting
template
Mounting
bracket
Access
point
840-9502-0088
T-bar
T-bar clamp halves
Slide together
840-9502-0003
23.9-mm (15/16-inch) or 14.2-mm (9/16-inch) T-bar
T-bar
T-bar clamp halves
Slide together
840-9502-0066
15.9-mm (5/8-inch) T-bar
(The clamps are different widths but the assembly is the same.)
840-9502-0011
840-9502-0008