User Guide
Table Of Contents
- Nortel WLAN Security Switch 2300 Series Configuration Guide
- Contents
- How to get Help
- Introducing the Nortel WLAN 2300 System
- Using the Command-Line Interface
- Configuring AAA for Administrative and Local Access
- Configuring and Managing Ports and VLANs
- Configuring and Managing Ports
- Configuring and Managing VLANs
- Managing the Layer 2 Forwarding Database
- Port and VLAN Configuration Scenario
- Configuring and Managing IP Interfaces and Services
- MTU Support
- Configuring and Managing IP Interfaces
- Configuring the System IP Address
- Configuring and Managing IP Routes
- Managing the Management Services
- Configuring and Managing DNS
- Configuring and Managing Aliases
- Configuring and Managing Time Parameters
- Setting the Time Zone
- Configuring the Summertime Period
- Statically Configuring the System Time and Date
- Displaying the Time and Date
- Configuring and Managing NTP
- Adding an NTP Server
- Removing an NTP Server
- Changing the NTP Update Interval
- Resetting the Update Interval to the Default
- Enabling the NTP Client
- Displaying NTP Information
- Managing the ARP Table
- Pinging Another Device
- Logging In to a Remote Device
- Tracing a Route
- IP Interfaces and Services Configuration Scenario
- Configuring SNMP
- Overview
- Configuring SNMP
- Displaying SNMP Information
- Configuring and Managing Mobility Domain Roaming
- Configuring User Encryption
- Configuring AP access points
- AP Overview
- Configuring AP access points
- Specifying the Country of Operation
- Configuring a Template for Automatic AP Configuration
- Configuring AP Port Parameters
- Configuring AP-WSS Security
- Configuring a Service Profile
- Configuring a Radio Profile
- Configuring Radio-Specific Parameters
- Mapping the Radio Profile to Service Profiles
- Assigning a Radio Profile and Enabling Radios
- Disabling or Reenabling Radios
- Displaying AP Information
- Displaying AP Configuration Information
- Displaying a List of Distributed APs
- Displaying a List of Distributed APs that Are Not Configured
- Displaying Connection Information for Distributed APs
- Displaying Service Profile Information
- Displaying Radio Profile Information
- Displaying AP Status Information
- Displaying AP Statistics Counters
- Configuring RF Auto-Tuning
- Wi-Fi Multimedia
- Configuring and Managing Spanning Tree Protocol
- Configuring and Managing IGMP Snooping
- Configuring and Managing Security ACLs
- About Security Access Control Lists
- Creating and Committing a Security ACL
- Mapping Security ACLs
- Modifying a Security ACL
- Using ACLs to Change CoS
- Enabling Prioritization for Legacy Voice over IP
- Security ACL Configuration Scenario
- Managing Keys and Certificates
- Why Use Keys and Certificates?
- About Keys and Certificates
- Creating Keys and Certificates
- Choosing the Appropriate Certificate Installation Method for Your Network
- Creating Public-Private Key Pairs
- Generating Self-Signed Certificates
- Installing a Key Pair and Certificate from a PKCS #12 Object File
- Creating a CSR and Installing a Certificate from a PKCS #7 Object File
- Installing a CA’s Own Certificate
- Displaying Certificate and Key Information
- Key and Certificate Configuration Scenarios
- Configuring AAA for Network Users
- About AAA for Network Users
- AAA Tools for Network Users
- Configuring 802.1X Authentication
- Configuring Authentication and Authorization by MAC Address
- Configuring Web-based AAA
- Configuring Last-Resort Access
- Configuring AAA for Users of Third-Party APs
- Assigning Authorization Attributes
- Overriding or Adding Attributes Locally with a Location Policy
- Configuring Accounting for Wireless Network Users
- Displaying the AAA Configuration
- Avoiding AAA Problems in Configuration Order
- Configuring a Mobility Profile
- Network User Configuration Scenarios
- Configuring Communication with RADIUS
- Managing 802.1X on the WSS Switch
- Managing Sessions
- Managing System Files
- Rogue Detection and Countermeasures
- About Rogues and RF Detection
- Summary of Rogue Detection Features
- Configuring Rogue Detection Lists
- Enabling Countermeasures
- Disabling or Reenabling Active Scan
- Enabling AP Signatures
- Disabling or Reenabling Logging of Rogues
- Enabling Rogue and Countermeasures Notifications
- IDS and DoS Alerts
- Displaying RF Detection Information
- Appendix A: Troubleshooting a WS Switch
- Fixing Common WSS Setup Problems
- Recovering the System Password
- Configuring and Managing the System Log
- Running Traces
- Using Show Commands
- Remotely Monitoring Traffic
- Capturing System Information for Technical Support
- Appendix B: Supported RADIUS Attributes
- Appendix C: Mobility Domain Traffic Ports
- Appendix D: DHCP Server
- Glossary
- Index
- Command Index
Rogue Detection and Countermeasures 559
Nortel WLAN Security Switch 2300 Series Configuration Guide
IDS Log Message Examples
Table 34 shows examples of the log messages generated by IDS.
Table 34: IDS and DoS Log Messages
Message Type Example Log Message
Probe message flood Client aa:bb:cc:dd:ee:ff is sending probe message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Authentication
message flood
Client aa:bb:cc:dd:ee:ff is sending authentication message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Null data message
flood
Client aa:bb:cc:dd:ee:ff is sending null data message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Management frame 6
flood
Client aa:bb:cc:dd:ee:ff is sending rsvd mgmt frame 6 message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Management frame 7
flood
Client aa:bb:cc:dd:ee:ff is sending rsvd mgmt frame 7 message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Management frame D
flood
Client aa:bb:cc:dd:ee:ff is sending rsvd mgmt frame D message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Management frame E
flood
Client aa:bb:cc:dd:ee:ff is sending rsvd mgmt frame E message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Management frame F
flood
Client aa:bb:cc:dd:ee:ff is sending rsvd mgmt frame F message flood.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Associate request flood Client aa:bb:cc:dd:ee:ff is sending associate request flood on port 2
Reassociate request
flood
Client aa:bb:cc:dd:ee:ff is sending re-associate request flood on port 2
Disassociate request
flood
Client aa:bb:cc:dd:ee:ff is sending disassociate request flood on port 2
Weak WEP
initialization vector
(IV)
Client aa:bb:cc:dd:ee:ff is using weak wep initialization vector.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Decrypt errors Client aa:bb:cc:dd:ee:ff is sending packets with decrypt errors.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Spoofed
deauthentication
frames
Deauthentication frame from AP aa:bb:cc:dd:ee:ff is being spoofed.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Spoofed disassociation
frames
Disassociation frame from AP aa:bb:cc:dd:ee:ff is being spoofed.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Null probe responses AP aa:bb:cc:dd:ee:ff is sending null probe responses.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.
Broadcast
deauthentications
AP aa:bb:cc:dd:ee:ff is sending broadcast deauthentications.
Seen by AP on port 2, radio 1 on channel 11 with RSSI -53.