User Guide
Table Of Contents
- Nortel WLAN Security Switch 2300 Series Configuration Guide
- Contents
- How to get Help
- Introducing the Nortel WLAN 2300 System
- Using the Command-Line Interface
- Configuring AAA for Administrative and Local Access
- Configuring and Managing Ports and VLANs
- Configuring and Managing Ports
- Configuring and Managing VLANs
- Managing the Layer 2 Forwarding Database
- Port and VLAN Configuration Scenario
- Configuring and Managing IP Interfaces and Services
- MTU Support
- Configuring and Managing IP Interfaces
- Configuring the System IP Address
- Configuring and Managing IP Routes
- Managing the Management Services
- Configuring and Managing DNS
- Configuring and Managing Aliases
- Configuring and Managing Time Parameters
- Setting the Time Zone
- Configuring the Summertime Period
- Statically Configuring the System Time and Date
- Displaying the Time and Date
- Configuring and Managing NTP
- Adding an NTP Server
- Removing an NTP Server
- Changing the NTP Update Interval
- Resetting the Update Interval to the Default
- Enabling the NTP Client
- Displaying NTP Information
- Managing the ARP Table
- Pinging Another Device
- Logging In to a Remote Device
- Tracing a Route
- IP Interfaces and Services Configuration Scenario
- Configuring SNMP
- Overview
- Configuring SNMP
- Displaying SNMP Information
- Configuring and Managing Mobility Domain Roaming
- Configuring User Encryption
- Configuring AP access points
- AP Overview
- Configuring AP access points
- Specifying the Country of Operation
- Configuring a Template for Automatic AP Configuration
- Configuring AP Port Parameters
- Configuring AP-WSS Security
- Configuring a Service Profile
- Configuring a Radio Profile
- Configuring Radio-Specific Parameters
- Mapping the Radio Profile to Service Profiles
- Assigning a Radio Profile and Enabling Radios
- Disabling or Reenabling Radios
- Displaying AP Information
- Displaying AP Configuration Information
- Displaying a List of Distributed APs
- Displaying a List of Distributed APs that Are Not Configured
- Displaying Connection Information for Distributed APs
- Displaying Service Profile Information
- Displaying Radio Profile Information
- Displaying AP Status Information
- Displaying AP Statistics Counters
- Configuring RF Auto-Tuning
- Wi-Fi Multimedia
- Configuring and Managing Spanning Tree Protocol
- Configuring and Managing IGMP Snooping
- Configuring and Managing Security ACLs
- About Security Access Control Lists
- Creating and Committing a Security ACL
- Mapping Security ACLs
- Modifying a Security ACL
- Using ACLs to Change CoS
- Enabling Prioritization for Legacy Voice over IP
- Security ACL Configuration Scenario
- Managing Keys and Certificates
- Why Use Keys and Certificates?
- About Keys and Certificates
- Creating Keys and Certificates
- Choosing the Appropriate Certificate Installation Method for Your Network
- Creating Public-Private Key Pairs
- Generating Self-Signed Certificates
- Installing a Key Pair and Certificate from a PKCS #12 Object File
- Creating a CSR and Installing a Certificate from a PKCS #7 Object File
- Installing a CA’s Own Certificate
- Displaying Certificate and Key Information
- Key and Certificate Configuration Scenarios
- Configuring AAA for Network Users
- About AAA for Network Users
- AAA Tools for Network Users
- Configuring 802.1X Authentication
- Configuring Authentication and Authorization by MAC Address
- Configuring Web-based AAA
- Configuring Last-Resort Access
- Configuring AAA for Users of Third-Party APs
- Assigning Authorization Attributes
- Overriding or Adding Attributes Locally with a Location Policy
- Configuring Accounting for Wireless Network Users
- Displaying the AAA Configuration
- Avoiding AAA Problems in Configuration Order
- Configuring a Mobility Profile
- Network User Configuration Scenarios
- Configuring Communication with RADIUS
- Managing 802.1X on the WSS Switch
- Managing Sessions
- Managing System Files
- Rogue Detection and Countermeasures
- About Rogues and RF Detection
- Summary of Rogue Detection Features
- Configuring Rogue Detection Lists
- Enabling Countermeasures
- Disabling or Reenabling Active Scan
- Enabling AP Signatures
- Disabling or Reenabling Logging of Rogues
- Enabling Rogue and Countermeasures Notifications
- IDS and DoS Alerts
- Displaying RF Detection Information
- Appendix A: Troubleshooting a WS Switch
- Fixing Common WSS Setup Problems
- Recovering the System Password
- Configuring and Managing the System Log
- Running Traces
- Using Show Commands
- Remotely Monitoring Traffic
- Capturing System Information for Technical Support
- Appendix B: Supported RADIUS Attributes
- Appendix C: Mobility Domain Traffic Ports
- Appendix D: DHCP Server
- Glossary
- Index
- Command Index
Configuring AAA for Network Users 433
Nortel WLAN Security Switch 2300 Series Configuration Guide
Configuring Portal Web-based AAA
To configure portal Web-based AAA:
1 Configure the user’s VLAN on the WSS switch, and configure an IP interface on the VLAN.The
interface must be in the subnet on which the DHCP server will place the user.
2 Set the fallthru authentication type to web-portal for all SSIDs and wired authentication ports through
which Web-based AAA users will access the network. The default for SSIDs is already web-portal.
However, the default for wired authentication ports is none.
3 Configure web-portal-ssid and web-portal-wired users. You must create a web-portal-ssid user for
each SSID. However, the web-portal-wired user is applicable to all wired authentication ports.
Set the VLAN-Name and Filter-Id attributes for these users. For the VLAN-Name, specify the VLAN in
which you want to place authorized Web-based AAA users. For Filter-Id, specify the portal ACL, and
map the ACL to the inbound traffic direction.
4 Configure individual Web-based AAA users. Because the VLAN is assigned based on the
web-portal-ssid or web-portal-wired user, WSS Software ignores the VLAN-Name and
Tunnel-Private-Group-ID attributes. However, WSS Software does assign other attributes if set.
5 Configure a last-resort authentication rule for each web-portal-ssid and web-portal-wired user.
6 Configure web authentication rules for the Web-based AAA users.
7 Save the configuration changes.
Portal Web-based AAA Configuration Example
This example configures portal Web-based AAA for wireless users of SSID mycorp. The web-portal-mycorp user and
the individual Web-based AAA users are configured in the local database. The default fallthru authentication type for
SSIDs is already web-portal, so this example does not include the command to set it.
1 Configure the user’s VLAN on ports 2 and 3, and configure an IP interface on the VLAN:
23x0# set vlan corpvlan port 2-3
success: change accepted.
23x0# set interface corpvlan ip 192.168.12.10 255.255.255.0
success: change accepted.
2 Configure user web-portal-mycorp for SSID mycorp, which Web-based AAA users will use to access
the network. Use the vlan-name attribute to assign the user to the VLAN corpvlan.
23x0# set user web-portal-mycorp attr vlan-name corpvlan
3 Assign the ACL web to the inbound traffic direction for user web-portal-mycorp:
23x0# set user web-portal-mycorp attr filter-id portalacl.in
4 Configure individual Web-based AAA users.
23x0# set user alice password alicepword
success: change accepted.
23x0# set user bob password bobpword
success: change accepted.