User Guide
Table Of Contents
- Nortel WLAN Security Switch 2300 Series Configuration Guide
- Contents
- How to get Help
- Introducing the Nortel WLAN 2300 System
- Using the Command-Line Interface
- Configuring AAA for Administrative and Local Access
- Configuring and Managing Ports and VLANs
- Configuring and Managing Ports
- Configuring and Managing VLANs
- Managing the Layer 2 Forwarding Database
- Port and VLAN Configuration Scenario
- Configuring and Managing IP Interfaces and Services
- MTU Support
- Configuring and Managing IP Interfaces
- Configuring the System IP Address
- Configuring and Managing IP Routes
- Managing the Management Services
- Configuring and Managing DNS
- Configuring and Managing Aliases
- Configuring and Managing Time Parameters
- Setting the Time Zone
- Configuring the Summertime Period
- Statically Configuring the System Time and Date
- Displaying the Time and Date
- Configuring and Managing NTP
- Adding an NTP Server
- Removing an NTP Server
- Changing the NTP Update Interval
- Resetting the Update Interval to the Default
- Enabling the NTP Client
- Displaying NTP Information
- Managing the ARP Table
- Pinging Another Device
- Logging In to a Remote Device
- Tracing a Route
- IP Interfaces and Services Configuration Scenario
- Configuring SNMP
- Overview
- Configuring SNMP
- Displaying SNMP Information
- Configuring and Managing Mobility Domain Roaming
- Configuring User Encryption
- Configuring AP access points
- AP Overview
- Configuring AP access points
- Specifying the Country of Operation
- Configuring a Template for Automatic AP Configuration
- Configuring AP Port Parameters
- Configuring AP-WSS Security
- Configuring a Service Profile
- Configuring a Radio Profile
- Configuring Radio-Specific Parameters
- Mapping the Radio Profile to Service Profiles
- Assigning a Radio Profile and Enabling Radios
- Disabling or Reenabling Radios
- Displaying AP Information
- Displaying AP Configuration Information
- Displaying a List of Distributed APs
- Displaying a List of Distributed APs that Are Not Configured
- Displaying Connection Information for Distributed APs
- Displaying Service Profile Information
- Displaying Radio Profile Information
- Displaying AP Status Information
- Displaying AP Statistics Counters
- Configuring RF Auto-Tuning
- Wi-Fi Multimedia
- Configuring and Managing Spanning Tree Protocol
- Configuring and Managing IGMP Snooping
- Configuring and Managing Security ACLs
- About Security Access Control Lists
- Creating and Committing a Security ACL
- Mapping Security ACLs
- Modifying a Security ACL
- Using ACLs to Change CoS
- Enabling Prioritization for Legacy Voice over IP
- Security ACL Configuration Scenario
- Managing Keys and Certificates
- Why Use Keys and Certificates?
- About Keys and Certificates
- Creating Keys and Certificates
- Choosing the Appropriate Certificate Installation Method for Your Network
- Creating Public-Private Key Pairs
- Generating Self-Signed Certificates
- Installing a Key Pair and Certificate from a PKCS #12 Object File
- Creating a CSR and Installing a Certificate from a PKCS #7 Object File
- Installing a CA’s Own Certificate
- Displaying Certificate and Key Information
- Key and Certificate Configuration Scenarios
- Configuring AAA for Network Users
- About AAA for Network Users
- AAA Tools for Network Users
- Configuring 802.1X Authentication
- Configuring Authentication and Authorization by MAC Address
- Configuring Web-based AAA
- Configuring Last-Resort Access
- Configuring AAA for Users of Third-Party APs
- Assigning Authorization Attributes
- Overriding or Adding Attributes Locally with a Location Policy
- Configuring Accounting for Wireless Network Users
- Displaying the AAA Configuration
- Avoiding AAA Problems in Configuration Order
- Configuring a Mobility Profile
- Network User Configuration Scenarios
- Configuring Communication with RADIUS
- Managing 802.1X on the WSS Switch
- Managing Sessions
- Managing System Files
- Rogue Detection and Countermeasures
- About Rogues and RF Detection
- Summary of Rogue Detection Features
- Configuring Rogue Detection Lists
- Enabling Countermeasures
- Disabling or Reenabling Active Scan
- Enabling AP Signatures
- Disabling or Reenabling Logging of Rogues
- Enabling Rogue and Countermeasures Notifications
- IDS and DoS Alerts
- Displaying RF Detection Information
- Appendix A: Troubleshooting a WS Switch
- Fixing Common WSS Setup Problems
- Recovering the System Password
- Configuring and Managing the System Log
- Running Traces
- Using Show Commands
- Remotely Monitoring Traffic
- Capturing System Information for Technical Support
- Appendix B: Supported RADIUS Attributes
- Appendix C: Mobility Domain Traffic Ports
- Appendix D: DHCP Server
- Glossary
- Index
- Command Index
Configuring and Managing Security ACLs 377
Nortel WLAN Security Switch 2300 Series Configuration Guide
Enabling SVP Optimization for SpectraLink Phones
You can configure WSS Software to prioritize voice traffic for VoIP phones that use SpectraLink Voice Priority (SVP).
If you disable WMM support and enable SVP support, WSS Software ensures voice quality for SpectraLink phones
using SVP by allocating CoS queues 6 and 7 on the MAP for distinct SVP treatment as well as forwarding all traffic
from that queue before forwarding traffic from other queues.
You can enable SVP optimization on a VLAN, port group, port list, virtual port list, Distributed AP, or user wildcard. To
enable SVP optimization, disable WMM support on the radio profile that serves the SVP users, configure an ACL that
assigns traffic for IP protocol 119 to CoS queue 6 or 7, and map the ACL to the outbound traffic direction.
For example, to enable SVP support for all users in VLAN corp_vlan, perform the following steps:
1 Disable WMM support on the radio profile that will serve SVP users, to enable SVP optimization on AP
forwarding queues 6 and 7 for radios managed by that radio profile:
23x0# set radio-profile radprofsvp wmm disable
2 Configure an ACE in ACL svp that assigns IP protocol 119 traffic for all source and destination addresses
to CoS queue 7:
23x0# set security acl ip svp permit cos 7 119 0.0.0.0 255.255.255.255 0.0.0.0
255.255.255.255
3 Configure another ACE to change the default action of the ACL from deny to permit. Otherwise, the
ACL permits only voice traffic that matches the previous ACE and denies all other traffic.
23x0# set security acl ip svp permit 0.0.0.0 255.255.255.255
4 Commit the ACL to the configuration:
23x0# commit security acl svp
5 Map the ACL to the outbound traffic direction of VLAN corp_vlan:
23x0# set security acl map voip vlan corp_vlan out
Security ACL Configuration Scenario
The following scenario illustrates how to create a security ACL named acl-99 that consists of one ACE to permit
incoming packets from one IP address, and how to map the ACL to a port and a user:
1 Type the following command to create and name a security ACL and add an ACE to it.
23x0# set security acl ip acl-99 permit 192.168.1.1 0.0.0.0
2 To view the ACE you have entered, type the following command:
23x0# show security acl editbuffer
ACL Type Status
---------------------------------- ---- -------------
acl-99 IP Not committed
3 To save acl-99 and its associated ACE to the configuration, type the following command:
23x0# commit security acl acl-99