Hub/Switch Reference Guide

VLAN Commands 91

Nortel WLAN—Security Switch 2300 Series Command Line Reference

The following command adds port 16 to VLAN beige and assigns tag value 86 to the port:

WSS# set vlan beige port 16 tag 86

success: change accepted.

See Also

• clear vlan on page 76

• set vlan name on page 79

• show vlan config on page 89

set vlan tunnel-affinity

Changes a WSS’s preferability within a mobility domain for tunneling user traffic for a VLAN. When a user roams to a

WSS that is not a member of the user’s VLAN, the switch can forward the user traffic by tunneling to another WSS that

is a member of the VLAN.

Syntax

set vlan vlan-id tunnel-affinity num

Defaults

Each VLAN on a WSS’s network ports has an affinity value of 5 by default.

Access

Enabled.

Usage

Increasing a switch’s affinity value increases the switch’s preferability for forwarding user traffic for

the VLAN.

If more than one WSS has the highest affinity value, WSS Software randomly selects one of the switches for the tunnel.

Examples

The following command changes the VLAN affinity for VLAN beige to 10:

WSS# set vlan beige tunnel-affinity 10

success: change accepted.