Hub/Switch Reference Guide

83
Nortel WLAN—Security Switch 2300 Series Command Line Reference
VLAN Commands
Use virtual LAN (VLAN) commands to configure and manage parameters for individual port VLANs on network ports,
and to display information about clients roaming within a mobility domain. This chapter presents VLAN commands
alphabetically. Use the following table to locate commands in this chapter based on their use.
Creation set vlan name on page 79
Ports set vlan port on page 80
clear vlan on page 76
show vlan config on page 89
Roaming and Tunnels show roaming station on page 84
show roaming vlan on page 85
show tunnel on page 88
Restriction of Client Layer 2
Forwarding
set security l2-restrict on page 78
show security l2-restrict on page 87
clear security l2-restrict on page 75
clear security l2-restrict counters on page 75
Tunnel Affinity set vlan tunnel-affinity on page 81
FDB Entries set fdb on page 77
show fdb on page 81
show fdb count on page 84
clear fdb on page 74
FDB Aging Timeout set fdb agingtime on page 78
show fdb agingtime on page 83