Hub/Switch Reference Guide

78 System Services Commands
NN47250-100 (Version 02.51)
See Also show system on page 68
show system
Displays system information.
Syntax show system
Defaults None.
Access Enabled.
History
Examples
To show system information, type the following command:
WSS# show system
==============================================================================
=
Product Name: WSS
System Name: WSS-bldg3
System Countrycode: US
System Location: first-floor-bldg3
System Contact: [e-mail]
System IP: 192.168.12.7
System idle timeout: 3600
System MAC: 00:0B:0E:00:04:30
==============================================================================
=
Boot Time: 2003-11-07 15:45:49
Uptime: 13 days 04:29:10
==============================================================================
=
Fan status: fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok temp2 ok temp3 ok
PSU Status: Lower Power Supply DC ok AC ok Upper Power Supply missing
Memory: 97.04/744.03 (13%)
Total Power Over
Ethernet : 29.000
==============================================================================
=
Table 10 describes the fields of show system output.
Version 4.0 License field removed. To display license information, use the
show license command.