Hub/Switch Reference Guide

System Services Commands 77
Nortel WLAN—Security Switch 2300 Series Command Line Reference
show banner motd
Shows the banner that was configured with the set banner motd command.
Syntax show banner motd
Defaults None.
Access Enabled.
Examples To display the banner with the message of the day, type the following command:
WSS# show banner motd
hello world
See Also
• clear banner motd on page 54
show licenses
Displays information about the license key(s) currently installed on a 2380 or 2382 switch.
Syntax show licenses
Defaults None.
Access All.
Usage This command applies only to the 2380 0r 2382.
Examples To view license keys, type the following command:
WSS# show licenses
Feature : 80 additional APs
See Also set license on page 61
show load
Displays CPU usage on a WSS.
Syntax show load
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.1.
Examples To display the CPU load recorded from the time the WSS was booted, as well as from the
previous time the show load command was run, type the following command:
WSS# show load
System Load: overall: 2% delta: 5%
The overall field shows the CPU load as a percentage from the time the WSS was booted. The delta field shows CPU
load as a percentage from the last time the show load command was entered.