Hub/Switch Reference Guide

62 Port Commands
NN47250-100 (Version 02.51)
See Also
• clear port type on page 27
• set port on page 35
• set port name on page 38
• set port negotiation on page 39
• set port speed on page 40
• set port type ap on page 41
• set port type wired-auth on page 44
Admin Administrative status of the port:
• up—The port is enabled.
• down—The port is disabled.
Oper Operational status of the port:
• up—The port is operational.
• down—The port is not operational.
Config Port speed configured on the port:
• 10—10 Mbps.
• 100—100 Mbps.
• 1000—1000 Mbps.
• auto—The port sets its own speed.
Actual Speed and operating mode in effect on the port.
Type Port type:
•ap—AP port
• network—Network port
• wa—Wired authentication port
Media Link type:
• 10/100BaseTX—10/100BASE-T.
• GBIC—1000BASE-SX or 1000BASE-LX GBIC.
• 1000BaseT—1000BASE-T.
• No connector—GBIC slot is empty.
Table 9: Output for show port status (continued)
Field Description