Hub/Switch Reference Guide

Port Commands 61
Nortel WLAN—Security Switch 2300 Series Command Line Reference
show port status
Displays configuration and status information for ports.
Syntax show port status [port-list]
Defaults None.
Access All.
Examples The following command displays information for all ports on a 22-port WSS:
WSS# show port status
Port Name Admin Oper Config Actual Type Media
==============================================================================
=
1 1 up up auto 100/full network 10/100BaseTx
2 2 up down auto network 10/100BaseTx
3 3 up down auto network 10/100BaseTx
4 4 up down auto network 10/100BaseTx
5 5 up down auto network 10/100BaseTx
6 6 up down auto network 10/100BaseTx
7 7 up down auto network 10/100BaseTx
8 8 up down auto network 10/100BaseTx
9 9 up up auto 100/full ap 10/100BaseTx
10 10 up up auto 100/full network 10/100BaseTx
11 11 up down auto network 10/100BaseTx
12 12 up down auto network 10/100BaseTx
13 13 up down auto network 10/100BaseTx
14 14 up down auto network 10/100BaseTx
15 15 up down auto network 10/100BaseTx
16 16 up down auto network 10/100BaseTx
17 17 up down auto network 10/100BaseTx
18 18 up down auto network 10/100BaseTx
19 19 up down auto network 10/100BaseTx
20 20 up down auto network 10/100BaseTx
21 21 up down auto network no connector
22 22 up down auto network no connector
Table 9 describes the fields in this display.
port-list List of physical ports. If you do not specify a port list, information is
displayed for all ports.
Table 9: Output for show port status
Field Description
Port Port number.
Name Port name. If the port does not have a name, the port number is
listed.