Hub/Switch Reference Guide

602 Boot Prompt Commands

NN47250-100 (Version 02.51)

diag

Accesses the diagnostic mode.

Syntax

diag

Defaults

The diagnostic mode is disabled by default.

Access

Boot prompt.

Usage

Access to the diagnostic mode requires a password, which is not user configurable. Use this mode

only if advised to do so by Nortel.

dir

Displays the boot code and system image files on a WSS.

Syntax

dir [c: | d: | e: | f: | boot0 | boot1]

Defaults

None.

Access

Boot prompt.

Usage

To display the system image software versions, use the fver command. This command does not list

the boot code versions. To display the boot code versions, use the version command.

Examples

The following command displays all the boot code and system image files on a WSS:

boot> dir

Internal Compact Flash Directory (Primary):

WSS010101.020 5523634 bytes

BLOAD 696176 bytes

BSTRAP 38056 bytes

Internal Compact Flash Directory (Secondary):

WSS010101.020 5524593 bytes