Hub/Switch Reference Guide

Boot Prompt Commands 601

Nortel WLAN—Security Switch 2300 Series Command Line Reference

Examples

To remove the currently active boot profile, type the following command:

boot> delete

BOOT Index: 1

BOOT TYPE: c

DEVICE: boot1:

FILENAME: default

FLAGS: 00000000

OPTIONS: run=nos;boot=0

See Also

• change on page 588

• create on page 590

• next on page 595

• show on page 596

dhcp

Displays or changes the state of the DHCP option. The DHCP option controls whether a WSS uses DCHP to obtain its

IP address when it is booted using a TFTP server.

Syntax

dhcp [ON | on | OFF | off]

Defaults

The DHCP option is disabled by default.

Access

Boot prompt.

Examples

The following command displays the current setting of the DHCP option:

boot> dhcp

DHCP is currently enabled.

The following command disables the DHCP option:

boot> dhcp

DHCP is currently disabled.