Hub/Switch Reference Guide

System Log Commands 591
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• clear log on page 575
• show log config on page 581
show log config
Displays log configuration information.
Syntax show log config
Defaults None.
Access Enabled.
Examples To display how logging is configured, type the following command:
WSS# show log config
Logging console: disabled
Logging console severity: DEBUG
Logging sessions: disabled
Logging sessions severity: INFO
Logging buffer: enabled
Logging buffer severity: WARNING
Logging trace: enabled
Logging trace severity: DEBUG
Logging buffer size: 10485760 bytes
Log marking: disabled
Log marking severity: NOTICE
Log marking interval: 300 seconds
Logging server: 172.21.12.19 port 514 severity EMERGENCY
Current session: disabled
Current session severity: INFO
See Also
• set log on page 576
• clear log on page 575
show log trace
Displays system information stored in the nonvolatile log buffer or the trace buffer.