Hub/Switch Reference Guide

Snoop Commands 583
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Table 88 describes the fields in this display.
Table 1: show snoop stats Output
Field Description
Filter Name of the snoop filter.
ap AP containing the radio to which the filter is mapped.
Radio Radio to which the filter is mapped.
Rx Match Number of packets received by the radio that match the filter.
Tx Match Number of packets sent by the radio that match the filter.
Dropped Number of packets that matched the filter but that were not copied
to the observer due to memory or network problems.
Stop-After Filter state:
• running—enabled
• stopped—disabled
• number-of-packets—If the filter is running and the
stop-after option was used to stop the filter, this
field displays the number of packets that still need
to match before the filter is stopped.