Hub/Switch Reference Guide

576 Snoop Commands
NN47250-100 (Version 02.51)
clear snoop map
Removes a snoop filter from an AP radio.
Examples clear snoop map filter-name ap ap-num radio {1 | 2}
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command removes snoop filter snoop2 from radio 2 on AP 3:
WSS# clear snoop map snoop2 ap 3 radio 2
success: change accepted.
The following command removes all snoop filter mappings from all radios:
WSS# clear snoop map all
success: change accepted.
See Also
• set snoop map on page 568
• show snoop on page 570
• show snoop map on page 571
filter-name Name of the snoop filter.
ap ap-num Number of a AP to which to snoop filter is mapped.
radio 1 Radio 1 of the AP.
radio 2 Radio 2 of the AP. (This option does not apply to single-radio models.)