Hub/Switch Reference Guide

Port Commands 57
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Usage You can specify one statistic type with the command.
Examples The following command shows octet statistics for port 3:
WSS> show port counters octets port 3
Port Status Rx Octets Tx Octets
=============================================================================
3 Up 27965420 34886544
This command’s output has the same fields as the monitor port counters command. For descriptions of the
fields, see Table 3 on page 30.
See Also
• clear port counters on page 24
• monitor port counters on page 28
show port-group
Displays port group information.
Syntax show port-group [name group-name]
Defaults None.
Access All.
History
Examples
The following command displays the configuration of port group server2:
WSS# show port-group name server2
Port group: server2 is up
Ports: 15, 17
Table 6 describes the fields in the show port-group output.
name group-name Displays information for the specified port group.
Version 4.1 Option all removed for simplicity. You can display information
for all groups by entering the command without specifying a
group name.
Table 6: Output for show port-group
Field Description
Port group Name and state (enabled or disabled) of the port group.
Ports Ports contained in the port group.