Hub/Switch Reference Guide

566 File Management Commands
NN47250-100 (Version 02.51)
See Also show boot on page 551
uninstall soda agent
Removes the contents of a directory containing SODA agent files.
Syntax uninstall soda agent agent-directory directory
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.1.
Usage Use this command to remove a SODA agent directory and all of its contents. All files in the specified
directory are removed. The command removes the directory and its contents, regardless of whether it contains
SODA agent files.
Examples The following command removes the directory sp1 and all of its contents:
WSS# uninstall soda agent agent-directory sp1
This will delete all files in agent-directory, do you wish to continue? (y|n) [n]y
Table 3: Output for show version
Field Description
Build Information Factory timestamp of the image file.
Label Software version and build date.
Build Suffix Build suffix.
Model Build model.
Hardware Version information for the WSS’s motherboard and Power over
Ethernet (PoE) board.
Serial number Serial number of the WSS.
Flash Flash memory version.
Kernel Kernel version.
BootLoader Boot code version.
Port/ap Port number connected to an AP.
AP Model AP model number.
Serial # AP serial number.
Versions AP hardware, firmware, and software versions.
directory Directory on the WSS where SODA agent files are to be removed.