Hub/Switch Reference Guide

File Management Commands 563
Nortel WLAN—Security Switch 2300 Series Command Line Reference
show config
Displays the configuration running on the WSS.
Syntax show config [area area] [all]
Defaults None.
area
area
Configuration area. You can specify one of the following:
•aaa
•acls
•ap
•arp
•eapol
• httpd
•ip
•ip-config
•l2acl
•log
• mobility-domain
• network-domain
•ntp
• portconfig
• port-group
•qos
• radio-profile
•rfdetect
• service-profile
•sm
•snmp
•snoop
area area,
cont.
•spantree
•system
• trace
•vlan
• vlan-fdb
If you do not specify a configuration area, nondefault information for all
areas is displayed.
all Includes configuration items that are set to their default values.