Hub/Switch Reference Guide

550 File Management Commands
NN47250-100 (Version 02.51)
Syntax delete url
Defaults None.
Access Enabled.
Usage You might want to copy the file to a TFTP server as a backup before deleting the file.
Examples The following commands copy file testconfig to a TFTP server and delete the file from
nonvolatile storage:
WSS# copy testconfig tftp://10.1.1.1/testconfig
success: sent 365 bytes in 0.401 seconds [ 910 bytes/sec]
WSS# delete testconfig
success: file deleted.
Examples The following command deletes file dang_doc from subdirectory dang:
WSS# delete dang/dang_doc
success: file deleted.
See Also
• copy on page 537
• dir on page 540
dir
Displays a list of the files in nonvolatile storage and temporary files.
Syntax dir [subdirname] | [file:] | [core:] | [boot0:] | [boot1:]
Defaults None.
Access Enabled.
url Filename. Specify between 1 and 128 alphanumeric characters, with no
spaces.
If the file is in a subdirectory, specify the subdirectory name, followed by
a forward slash, in front of the filename. For example: subdir_a/file_a.
subdirname Subdirectory name. If you specify a subdirectory name, the command
lists the files in that subdirectory. Otherwise, the command lists the files
in the root directory and also lists the subdirectories.
file: Limits dir output to the contents of the user files area
core: Limits dir output to the contents of the /tmp/core subdirectory
boot0: Limits dir output to the contents of the boot0 partition
boot1: Limits dir output to the contents of the boot1 partition