Hub/Switch Reference Guide

538 RF Detection Commands
NN47250-100 (Version 02.51)
Device-type: interfering Adhoc: no Crypto-types: clear
RSSI: -76 SSID:
nrtl-webaaa
Two types of information are shown. The lines that are not indented show the BSSID, vendor, and information about the
SSID. The indented lines that follow this information indicate the listeners (AP radios) that detected the SSID. Each set
of indented lines is for a separate AP listener.
In this example, two BSSIDs are mapped to the SSID. Separate sets of information are shown for each of the BSSIDs,
and information about the listeners for each BSSID is shown.
The following command displays detailed information for a BSSID.
WSS# show rfdetect mobility-domain bssid 00:0b:0e:00:04:d1
BSSID: 00:0b:0e:00:04:d1 Vendor: Cisco SSID: notmycorp
Type: rogue Adhoc: no Crypto-types: clear
WSS-IPaddress: 10.8.121.102 Port/Radio/Ch: 3/2/56 Mac: 00:0b:0e:00:0a:6b
Device-type: rogue Adhoc: no Crypto-types: clear
RSSI: -72 SSID: notmycorp
WSS-IPaddress: 10.3.8.103 Port/Radio/Ch: ap 1/1/157 Mac: 00:0b:0e:76:56:82
Device-type: rogue Adhoc: no Crypto-types: clear
RSSI: -72 SSID: notmycorp
Table 81 and Table 82 describe the fields in these displays.
Table 5: show rfdetect mobility-domain Output
Field Description
BSSID MAC address of the SSID used by the detected device.
Vendor Company that manufactures or sells the rogue device.
Type Classification of the rogue device:
• rogue—Wireless device that is not supposed to be
on the network. The device has an entry in a
WSS’s FDB and is therefore on the network.
• intfr—Wireless device that is not part of your
network but is not a rogue. The device does not
have an entry in a WSS’s FDB and is not actually
on the network, but might be causing RF
interference with AP radios.
• known—Device that is a legitimate member of the
network.
Flags Classification and encryption information for the rogue:
• The i, a, or u flag indicates the classification.
• The other flags indicate the encryption used by the
rogue.
For flag definitions, see the key in the command output.