Hub/Switch Reference Guide

530 RF Detection Commands
NN47250-100 (Version 02.51)
• set rfdetect black-list on page 515
show rfdetect clients
Displays the wireless clients detected by a WSS.
Syntax show rfdetect clients [mac mac-addr]
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command shows information about all wireless clients detected by a WSS’s APs:
WSS# show rfdetect clients
Total number of entries: 30
Client MAC Client AP MAC AP Port/Radio NoL Type Last
Vendor Vendor /Channel seen
----------------- ------------------------ ------- ------------- ------------------ ------- -----
00:03:7f:bf:16:70 Unknown Unknown ap 1/1/6 1 intfr 207
00:04:23:77:e6:e5 Intel Unknown ap 1/1/2 1 intfr 155
00:05:5d:79:ce:0f D-Link Unknown ap 1/1/149 1 intfr 87
00:05:5d:7e:96:a7 D-Link Unknown ap 1/1/149 1 intfr 117
00:05:5d:7e:96:ce D-Link Unknown ap 1/1/157 1 intfr 162
00:05:5d:84:d1:c5 D-Link Unknown ap 1/1/1 1 intfr 52
The following command displays more details about a specific client:
WSS# show rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys
Port: ap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago): 84
Bssid: 00:0b:0e:01:02:00, Vendor: Nortel, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
The first line lists information for the client. The other lines list information about the most recent 802.11 packet
detected from the client.
Table 77 and Table 78 describe the fields in these displays.
mac mac-addr Displays detailed information for a specific client.
Table 1: show rfdetect clients Output
Field Description
Client MAC MAC address of the client.
Client Vendor Company that manufactures or sells the client.
AP MAC MAC address of the radio with which the rogue client is
associated.