Hub/Switch Reference Guide

RF Detection Commands 523
Nortel WLAN—Security Switch 2300 Series Command Line Reference
clear rfdetect ignore
Removes a device from the ignore list for RF scans. WSS Software does not generate log messages or traps for the
devices in the ignore list.
Syntax clear rfdetect ignore mac-addr
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 3.0.
Examples The following command removes BSSID aa:bb:cc:11:22:33 from the ignore list for RF scans:
23x0# clear rfdetect ignore aa:bb:cc:11:22:33
success: aa:bb:cc:11:22:33 is no longer ignored.
See Also
• set rfdetect ignore on page 515
• show rfdetect ignore on page 526
clear rfdetect ssid-list
Removes an SSID from the permitted SSID list.
Syntax clear rfdetect ssid-list ssid-name
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command clears SSID mycorp from the permitted SSID list:
WSS# clear rfdetect ssid-list mycorp
success: mycorp is no longer in ssid-list.
See Also
• set rfdetect ssid-list on page 517
• show rfdetect ssid-list on page 530
mac-addr Basic service set identifier (BSSID), which is a MAC address, of the
device to remove from the ignore list.
ssid-name SSID name you want to remove from the permitted SSID list.