Hub/Switch Reference Guide

522 RF Detection Commands
NN47250-100 (Version 02.51)
clear rfdetect attack-list
Removes a MAC address from the attack list.
Syntax clear rfdetect attack-list mac-addr
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command clears MAC address 11:22:33:44:55:66 from the attack list:
WSS# clear rfdetect attack-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer in attacklist.
See Also
• set rfdetect attack-list on page 514
• show rfdetect attack-list on page 519
clear rfdetect black-list
Removes a MAC address from the client black list.
Syntax clear rfdetect black-list mac-addr
Defaults None.
Access Enabled.
History Introduced in WSS Software Version 4.0.
Examples The following command removes MAC address 11:22:33:44:55:66 from the black list:
WSS# clear rfdetect black-list 11:22:33:44:55:66
success: 11:22:33:44:55:66 is no longer blacklisted.
See Also
• set rfdetect black-list on page 515
• show rfdetect black-list on page 519
mac-addr MAC address you want to remove from the attack list.
mac-addr MAC address you want to remove from the black list.