Hub/Switch Reference Guide

802.1X Management Commands 519
Nortel WLAN—Security Switch 2300 Series Command Line Reference
port 10, authcontrol: auto, max-sessions: 1
port 11, authcontrol: auto, max-sessions: 1
port 12, authcontrol: auto, max-sessions: 1
port 13, authcontrol: auto, max-sessions: 1
port 14, authcontrol: auto, max-sessions: 1
port 15, authcontrol: auto, max-sessions: 1
port 16, authcontrol: auto, max-sessions: 1
port 22, authcontrol: auto, max-sessions: 16
Type the following command to display 802.1X statistics:
WSS# show dot1x stats
802.1X statistic value
---------------- -----
Enters Connecting: 709
Logoffs While Connecting: 112
Enters Authenticating: 467
Success While Authenticating: 0
Timeouts While Authenticating: 52
Failures While Authenticating: 0
Reauths While Authenticating: 0
Starts While Authenticating: 31
Logoffs While Authenticating: 0
Starts While Authenticated: 85
Logoffs While Authenticated: 1
Bad Packets Received: 0
Table 76 explains the counters in the show dot1x stats output.
Table 1: show dot1x stats Output
Field Description
Enters Connecting Number of times that the WSS state transitions to the
CONNECTING state from any other state.
Logoffs While Connecting Number of times that the WSS state transitions from
CONNECTING to DISCONNECTED as a result of receiving an
EAPoL-Logoff message.
Enters Authenticating Number of times that the state wildcard transitions.
Success While Authenticating Number of times the WSS state transitions from
AUTHENTICATING from AUTHENTICATED, as a result of an
EAP-Response/Identity message being received from the
supplicant (client).
Timeouts While Authenticating Number of times that the WSS state wildcard transitions from
AUTHENTICATING to ABORTING.
Failures While Authenticating Number of times that the WSS state wildcard transitions from
AUTHENTICATION to HELD.