Hub/Switch Reference Guide

518 802.1X Management Commands
NN47250-100 (Version 02.51)
Access Enabled.
Examples Type the following command to display the 802.1X clients:
WSS# show dot1x clients
MAC Address State Vlan Identity
------------- ------- ------ ----------
00:20:a6:48:01:1f Connecting (unknown)
00:05:3c:07:6d:7c Authenticated vlan-it EXAMPLE\jose
00:05:5d:7e:94:83 Authenticated vlan-eng EXAMPLE\singh
00:02:2d:86:bd:38 Authenticated vlan-eng [e-mail]
00:05:5d:7e:97:b4 Authenticated vlan-eng EXAMPLE\havel
00:05:5d:7e:98:1a Authenticated vlan-eng EXAMPLE\nash
00:0b:be:a9:dc:4e Authenticated vlan-pm [e-mail]
00:05:5d:7e:96:e3 Authenticated vlan-eng EXAMPLE\mishan
00:02:2d:6f:44:77 Authenticated vlan-eng EXAMPLE\ethan
00:05:5d:7e:94:89 Authenticated vlan-eng EXAMPLE\fmarshall
00:06:80:00:5c:02 Authenticated vlan-eng EXAMPLE\bmccarthy
00:02:2d:6a:de:f2 Authenticated vlan-pm [e-mail]
00:02:2d:5e:5b:76 Authenticated vlan-pm EXAMPLE\tamara
00:02:2d:80:b6:e1 Authenticated vlan-cs [e-mail]
00:30:65:16:8d:69 Authenticated vlan-wep MAC authenticated
00:02:2d:64:8e:1b Authenticated vlan-eng EXAMPLE\wong
Type the following command to display the 802.1X configuration:
WSS# show dot1x config
802.1X user policy
----------------------
'host/bob-laptop.mycorp.com' on ssid 'mycorp' doing PASSTHRU
'bob.mycorp.com' on ssid 'mycorp' doing PASSTHRU (bonded)
802.1X parameter setting
---------------- -------
supplicant timeout 30
auth-server timeout 30
quiet period 5
transmit period 5
reauthentication period 3600
maximum requests 2
key transmission enabled
reauthentication enabled
authentication control enabled
WEP rekey period 1800
WEP rekey enabled
Bonded period 60
port 5, authcontrol: auto, max-sessions: 16
port 6, authcontrol: auto, max-sessions: 1
port 7, authcontrol: auto, max-sessions: 1
port 8, authcontrol: auto, max-sessions: 1
port 9, authcontrol: auto, max-sessions: 1