Hub/Switch Reference Guide

802.1X Management Commands 515
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• clear dot1x reauth-period on page 498
• show dot1x on page 507
set dot1x timeout auth-server
Sets the number of seconds that must elapse before the WSS times out a request to a RADIUS authentication server.
Syntax set dot1x timeout auth-server seconds
Defaults The default is 30 seconds.
Access Enabled.
History Introduced in WSS Software 1.0.
Examples Type the following command to set the authentication server timeout to 60 seconds:
WSS# set dot1x timeout auth-server 60
success: dot1x auth-server timeout set to 60.
See Also
• clear dot1x timeout auth-server on page 498
• show dot1x on page 507
set dot1x timeout supplicant
Sets the number of seconds that must elapse before the WSS times out an authentication session with a supplicant
(client).
Syntax set dot1x timeout supplicant seconds
Defaults The default is 30 seconds.
Access Enabled.
History Introduced in WSS Software 1.0.
Examples Type the following command to set the number of seconds for authentication session timeout to
300:
WSS# set dot1x timeout supplicant 300
success: dot1x supplicant timeout set to 300.
seconds Specify a value between 1 and 65,535.
seconds Specify a value between 1 and 65,535.