Hub/Switch Reference Guide

802.1X Management Commands 513
Nortel WLAN—Security Switch 2300 Series Command Line Reference
set dot1x quiet-period
Sets the number of seconds a WSS remains quiet and does not respond to a supplicant after a failed
authentication.
Syntax set dot1x quiet-period seconds
Defaults The default is 60 seconds.
Access Enabled.
History Introduced in WSS Software 1.0.
Examples Type the following command to set the quiet period to 90 seconds:
WSS# set dot1x quiet-period 90
success: dot1x quiet period set to 90.
See Also
• clear dot1x quiet-period on page 497
• show dot1x on page 507
set dot1x reauth
Determines whether the WSS allows the reauthentication of supplicants (clients).
Syntax set dot1x reauth {enable | disable}
Defaults Reauthentication is enabled by default.
Access Enabled.
History Introduced in WSS Software 1.0.
Examples Type the following command to enable reauthentication of supplicants (clients):
WSS# set dot1x reauth enable
success: dot1x reauthentication enabled.
See Also
• set dot1x reauth-max on page 504
• set dot1x reauth-period on page 504
• show dot1x on page 507
seconds Specify a value between 0 and 65,535.
enable Permits reauthentication.
disable Denies reauthentication.