Hub/Switch Reference Guide

506 802.1X Management Commands
NN47250-100 (Version 02.51)
clear dot1x bonded-period
Resets the Bonded Auth period to its default value.
Syntax clear dot1x max-req
Defaults The default bonded authentication period is 0 seconds.
Access Enabled.
History Introduced in WSS Software Version 2.1.
Usage
Examples To reset the Bonded period to its default, type the following command:
WSS# clear dot1x bonded-period
success: change accepted.
See Also
• set dot1x bonded-period on page 500
• show dot1x on page 507
clear dot1x max-req
Resets to the default setting the number of Extensible Authentication Protocol (EAP) requests that the WSS
retransmits to a supplicant (client).
Syntax clear dot1x max-req
Defaults The default number is 20.
Access Enabled.
History Introduced in WSS Software 1.0.
Examples To reset the number of 802.1X requests the WSS can send to the default setting, type
the following command:
WSS# clear dot1x max-req
success: change accepted.
See Also
• set dot1x max-req on page 501
• show dot1x on page 507
set dot1x timeout supplicant on page 505
clear dot1x timeout supplicant on page 499
Settings, Active Clients, and
Statistics
show dot1x on page 507