Hub/Switch Reference Guide

496 RADIUS and Server Groups Commands
NN47250-100 (Version 02.51)
clear radius server
Removes the named RADIUS server from the WSS configuration.
Syntax clear radius server server-name
Defaults None.
Access Enabled.
History Introduced in WSS Software 1.0.
Examples The following command removes the RADIUS server rs42 from a list of remote AAA servers:
WSS# clear radius server rs42
success: change accepted.
See Also
• set radius server on page 490
• show aaa on page 210
clear server group
Removes a RADIUS server group from the configuration, or disables load balancing for the group.
Syntax clear server group group-name [load-balance]
Defaults None.
Access Enabled.
History Introduced in WSS Software 1.0.
Usage Deleting a server group removes the server group from the configuration. However, the members of
the server group remain.
Examples To remove the server group sg-77 type the following command:
WSS# clear server group sg-77
success: change accepted.
To disable load balancing in a server group shorebirds, type the following command:
WSS# set server group shorebirds load-balance disable
success: change accepted.
server-name Name of a RADIUS server configured to perform remote AAA services
for the WSS.
group-name Name of a RADIUS server group configured to perform remote AAA
services for WSSs.
load-balance Ability of group members to share demand for services among servers.