Hub/Switch Reference Guide

RADIUS and Server Groups Commands 495
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Examples To clear the system IP address as the permanent source address for RADIUS client requests, type
the following command:
WSS# clear radius client system-ip
success: change accepted.
See Also
• set radius client system-ip on page 488
• show aaa on page 210
clear radius proxy client
Removes RADIUS proxy client entries for third-party APs.
Syntax clear radius proxy client all
Defaults None.
Access Enabled.
History Introduced in WSS Software 4.0.
Examples The following command clears all RADIUS proxy client entries from the switch:
WSS# clear radius proxy client all
success: change accepted.
See Also set radius proxy client on page 489
clear radius proxy port
Removes RADIUS proxy ports configured for third-party APs.
Syntax clear radius proxy port all
Defaults None.
Access Enabled.
History Introduced in WSS Software 4.0.
Examples The following command clears all RADIUS proxy port entries from the switch:
WSS# clear radius proxy port all
success: change accepted.
See Also set radius proxy port on page 489