Hub/Switch Reference Guide

Cryptography Commands 489
Nortel WLAN—Security Switch 2300 Series Command Line Reference
show crypto ca-certificate
Displays information about the certificate authority’s PEM-encoded PKCS #7 certificate.
Syntax show crypto ca-certificate {admin | eap | web}
Defaults None.
Access Enabled.
History
Examples
To display information about the certificate of a certificate authority, type the following
command:
WSS# show crypto ca-certificate
Table 74 describes the fields in the display.
See Also
• crypto ca-certificate on page 470
admin Displays information about the certificate authority’s certificate that signed the
administrative certificate for the WSS.
The administrative certificate authenticates the WSS to WLAN Management
Software or Web View.
eap Displays information about the certificate authority’s certificate that signed the
Extensible Authentication Protocol (EAP) certificate for the WSS.
The EAP certificate authenticates the
WSS to 802.1X supplicants (clients).
web Displays information about the certificate authority’s certificate that signed the Web-
based AAA certificate for the WSS.
The Web-based AAA certificate authenticates the WSS to Web-based AAA clients.
Version 4.1 webaaa option renamed to web
Table 1: show crypto ca-certificate Output
Fields Description
Version Version of the X.509 certificate.
Serial Number A unique identifier for the certificate or signature.
Subject Name of the certificate owner.
Signature Algorithm Algorithm that created the signature, such as RSA MD5 or RSA SHA.
Issuer Certificate authority that issued the certificate or signature.
Validity Time period for which the certificate is valid.