Hub/Switch Reference Guide

Security ACL Commands 477
Nortel WLAN—Security Switch 2300 Series Command Line Reference
Port number Control value for handling fragmented IP packets.
Note: The current WSS Software version filters only the first packet of a
fragmented IP packet and passes the remaining fragments.
Number of action types Number of actions that can be performed by ACLs. This value is always
2, because ACLs can either permit or deny.
LUdef in use Number of the lookup definition (LUdef) table currently in use for packet
handling.
Default action pointer Memory address used for packet handling, from which default action data
is obtained when necessary.
L4 global Security ACL mapping on the WSS:
• True—Security ACLs are mapped.
• False—No security ACLs are mapped.
No rules Security ACE rule mapping on the WSS:
• True—No security ACEs are mapped.
• False—Security ACEs are mapped.
Non-IP rules Non-IP security ACE mapping on the WSS:
• True—Non-IP security ACEs are mapped.
• False—Only IP security ACEs are mapped.
Note: The current WSS Software version supports security ACEs for IP
only.
Root in first
Leaf buffer allocation:
• True—Enough primary leaf buffers are allocated in
nonvolatile memory to accommodate all leaves.
• False—Insufficient primary leaf buffers are allocated in
nonvolatile memory to accommodate all leaves.
Static default action Definition of a default action:
• True—A default action types is defined.
• False—No default action type is defined.
No per-user (MAC)
mapping
Per-user application of a security ACL with the Filter-Id attribute, on the
WSS:
• True—No security ACLs are applied to users.
• False—Security ACLs are applied to users.
Out mapping Application of security ACLs to outgoing traffic on the WSS:
• True—Security ACLs are mapped to outgoing traffic.
• False—No security ACLs are mapped to outgoing
traffic.
Table 1: show security acl resource-usage Output (continued)
Field Description