Hub/Switch Reference Guide

Security ACL Commands 475
Nortel WLAN—Security Switch 2300 Series Command Line Reference
See Also
• clear security acl map on page 451
• set security acl map on page 459
• show security acl on page 461
show security acl resource-usage
Displays statistics about the resources used by security ACL filtering on the WSS.
Syntax show security acl resource-usage
Defaults None.
Access Enabled.
Usage Use this command with the help of the Nortel Enterprise Technical Support (NETS) to diagnose an
ACL resource problem. (To contact NETS, see “How to get help” on page 3.)
Examples To display security ACL resource usage, type the following command:
WSS# show security acl resource-usage
ACL resources
Classifier tree counters
------------------------
Number of rules : 2
Number of leaf nodes : 1
Stored rule count : 2
Leaf chain count : 1
Longest leaf chain : 2
Number of non-leaf nodes : 0
Uncompressed Rule Count : 2
Maximum node depth : 1
Sub-chain count : 0
PSCBs in primary memory : 0 (max: 512)
PSCBs in secondary memory : 0 (max: 9728)
Leaves in primary : 2 (max: 151)
Leaves in secondary : 0 (max 12096)
Sum node depth : 1
Information on Network Processor status
---------------------------------------
Fragmentation control : 0
UC switchdest : 0
ACL resources
Port number : 0
Number of action types : 2
LUdef in use : 5
Default action pointer : c8007dc