Hub/Switch Reference Guide

454 Session Management Commands
NN47250-100 (Version 02.51)
now on Shows the following information about the AP and radio the session is currently on:
• IP address and port number of the WSS managing the AP
• Serial number and radio number of the AP
• Amount of time the session has been on this AP
from Shows information about the APs from which the session has roamed. (See the
descriptions above for the now on field.)
Host name Host name of the user’s networking device.
Vlan-Name
(and other
attributes if set)
Authorization attributes for the user and how they were assigned (the sources of the
attribute values).
For Vlan-Name, the source of the attribute value can be one of the following:
• AAA—VLAN is from RADIUS or the local database.
• initial-assignment—For a client that has roamed from one WSS to
another, VLAN is the one assigned to the user on the WSS where the
user first accessed the network. (This is the WSS where the client’s
global session in the Mobility Domain started.)
This authorization source (initial-assignment) is displayed only if the
following conditions are true:
• The client roamed from another WSS.
• The service profile for the SSID the user is on is configured to keep
the client’s initial VLAN assignment. (This means the keep-initial-
vlan option is enabled on the service profile.)
• The VLAN is not configured for the user on the roamed-to switch
by the local database.
• A Location Policy on the roamed-to WSS does not set the VLAN.
• location policy—Attribute value was assigned by a Location Policy.
• service-profile—Attribute value is configured on the SSID, and was
not overridden by other attribute sources (such as AAA or location
policy).
• Web Portal—Session is for a Web Portal client.
Table 4: Additional show sessions network verbose
Output (continued)
Field Description