Hub/Switch Reference Guide

Session Management Commands 453
Nortel WLAN—Security Switch 2300 Series Command Line Reference
IP or MAC Address IP address of the session user, or the user’s MAC address if the user has
not yet received an IP address.
VLAN Name Name of the VLAN associated with the session.
Port/Radio Number of the port and radio through which the user is accessing this
session.
Table 4: Additional show sessions network verbose
Output
Field Description
Client MAC MAC address of the session user.
GID Global session ID, a unique session number within a Mobility Domain.
State Status of the session:
• AUTH, ASSOC REQ—Client is being associated by the 802.1X
protocol.
• AUTH AND ASSOC—Client is being associated by the 802.1X
protocol, and the user is being authenticated.
• AUTHORIZING—User has been authenticated (for example, by the
802.1X protocol and an AAA method), and is entering AAA
authorization.
• AUTHORIZED—User has been authorized by an AAA method.
• ACTIVE—User’s AAA attributes have been applied, and the user is
active on the network.
• DEASSOCIATED—One of the following:
• Wireless client has sent the WSS a disassociate message.
• User associated with one of the current WSS’s APs has appeared at
another WSS in the Mobility Domain.
• ROAMING AWAY—The WSS has been sent a request to transfer the
user, who is roaming, to another WSS.
• STATUS UPDATED—WSS is receiving a final update from an AP
about the user, who has roamed away.
• WEB_AUTHING—User is being authenticated by Web-based AAA.
• WIRED AUTH’ING—User is being authenticated by the 802.1X
protocol on a wired authentication port.
• KILLING—User’s session is being cleared, because of 802.1X
authentication failure, entry of a clear command, or some other event.
Table 3: show sessions network (summary) Output (continued)
Field Description